Your Ideal Water Heater Is Out There Waiting For You
Chances are, you never think about your water heater until you find the icy water of Antarctica pouring out of your shower head. We’ve all been enjoying a nice, warm, relaxing shower when our water heater runs out of the good stuff. So, the only thing left to do is suffer through the icy embrace of tap water.
If your water heater is no longer keeping up with the demand of your household, then it’s time to find one that will. The only problem is, where do you start looking for a new water heater? Unfortunately, the world of water heaters can be exceedingly complicated for a metal tank with a fire that heats it.
Not to worry! The expert plumbers of General Service Plumbers are here to guide you through the nonsense and help you find the water heater that best fits your needs.
With proper care and maintenance, new water heaters can deliver reliable service for over a decade. Once you have your new one, you’ll be set for years to come.
Never rerun Out Of Hot Water!
When choosing a new water heater, the first thing to consider is its capacity for producing hot water. Suppose you’re only heating water for a single person. In that case, you may be better off using nothing but the sun’s glorious rays to warm your bathwater (no, seriously). However, families of 6 or more will need a water heater to provide copious amounts of on-demand hot water.
To that end, you must determine the hot water your family uses before selecting a water heater. You can do this by taking the number of people living in your residence and adding 1. Then, take that sum and multiply it by 12. The result is the first-hour rating or the amount of hot water in gallons that a water heater should make during the first hour a faucet is open.
A tankless(or on-demand) water heater is rated based on a single faucet’s gallons per minute (GPM) flow. So, first, determine the number of hot water faucets that typically operate simultaneously in your household, and multiply this number by three, the average GPM flow rate of a tap. The result is the heating capacity rating of a tankless unit.
With these few pieces of advice in mind, you should always be able to tell if a water heater can meet the needs of your household.
Water Heaters Are As Unique As People
When it comes to water heaters, there are conventional ones, tankless ones, heaters that use solar energy, heaters that re-purpose your home’s heat to warm water, and even some that draw heat from elsewhere to do their job(more on that later). But, no matter how they do it, all heaters still only have one job: they take water and heat so that you can soak in a bubble bath without catching hypothermia.
Unless you’re in a unique situation, you may want to install a conventional or tankless water heater. The former uses fire or an electric coil to heat a massive water tank. The latter does the same, except it does it without the tank.
Traditional water heaters come with a large tank that stores heated water, which requires ample space. Gas models also need additional space for air to circulate in the burner unit. As a result, these models are reasonably reliable until they inevitably run out of water. Plus, the operating costs of one are much higher than a tankless one.
If you do not have the space to install a traditional model with the correct storage tank, your best bet is a tankless water heater. This appliance requires less space because it does not store water. Tankless heaters warm water only when a hot water faucet is open. Although more expensive than standard water heaters, tankless units are more energy efficient as they do not continually heat and reheat water in a storage tank.
What Is The Best Way To Power Your Water Heater
Whether you select a water heater with a storage tank or a tankless unit, you must decide what energy source it will use to heat the water. Both water heaters can run on electricity, propane, or natural gas. Still, some may be able to run on more, ahem, exotic energy sources.
Solar water heaters, for example, circulate water through pipes warmed by the sun before returning it to your home. On the other hand, specific heat pump models can use the constant heat of geothermal energy to heat your water!
Unfortunately, these more eco-friendly(and much more excellent) power sources are only available to a select few people. The rest of us can only pick from what is known as public utilities.
We Can Help You Pick The Right Replacement
Once you know how much water you use, which water heater best serves your needs, and whether or not you can run yours on volcano power, it’s time to choose a heater. If you’re still unsure which make and model is best for you, call General Service Plumbers at 323-855-791 and get the best professional advice.
Suppose you’re looking to replace your water heater in Northern California. In that case, we recommend the service provided by Dependable Rooter & Plumbing. As highly-rated plumbers, they can help you install Whittier water heaters that will meet your needs to a tee.
We offer both tanked and tankless water heater installation services in the following areas:
- Baldwin Park
- Bell Gardens
- Buena Park
- City Of Industry
- East Los Angeles
- El Monte
- La Habra Heights
- La Mirada
- Monterey Park
- Pico Rivera
- West Covina
If you want to leave us a review or learn more about us, click on a service location below:
And, if you’re looking for help with Colorado Springs water heaters, call our friends at Smith Plumbing, Heating, Cooling & Electrical today!